RP-195 10' (3 m) Rubber Track Asphalt Paver


RP-195 10' (3.0 m) Rubber Track Asphalt Paver

↓ Overview

Untitled document The RP-195 is a powerful, rubber-track paver made for highway work. Seats of the dual operator stations can move out beyond the sides of the machine to give the operator an excellent view down the sides of the machine. The four-way adjustable operator seats feature a ride control tension system for ultimate comfort. Noise levels of Roadtec pavers are among the lowest in the industry thanks to variable speed fans. Roadtec pavers come equipped with standard fume extraction systems for the operator area.

Like all Roadtec pavers, the RP-195 features Roadtec's exclusive antisegregation design of the feed tunnel, the feed tunnel discharge, and the rear augers.

↓ Features

Untitled document Untitled document Untitled document Untitled document Untitled document Untitled document Untitled document Untitled document Untitled document Untitled document Untitled document Untitled document
frame
Frame

All Roadtec Asphalt Pavers start with an extremely strong frame completely fabricated, welded and assembled by us.  This gives us complete control over the design and quality of the build.


pumps
Hydraulic Pumps
All Roadtec Asphalt Pavers use Sauer Danfoss® Series 90 hydraulic pumps for propel and material feed.  These large easily serviced pumps allow the entire hydraulic circuit to run extremely cool greatly prolonging the life and lowering the maintenance costs of all components.

radiators
Cooling Package
The cooling package on Roadtec pavers is mounted on the side of the paver where it can get the cleanest and coolest air. The radiators are also rated for higher horsepower engines and the fan is controlled hydraulically. The fan can run at the optimal speed depending on the load, which reduces noise levels emitted by the paver.

tracks
Tracks
Roadtec tracked pavers have a fully oscillating track frame to provide a smooth ride and lay a smooter mat.

augers
Augers
The auger assembly on Roadtec pavers can be hydraulically raised and lowered. This feature can assist in eliminating segregation in certain mixes and is very helpful during the loading and unloading process as well as constructing "supers". Standard sonic feed sensors control each side of the feed system. Each auger is driven by its own motor and the auger chain case width has been minimized to the smallest amount available to further eliminate centerline segregation.

auger_box
Feed System

All Roadtec pavers feature a 13 inch high conveyer opening for excellent throughput and have bolt-in wear resistant liners. Each conveyer is independently driven so material delivery can be fine tuned for each side. The space between the conveyers has been minimized which allows mix to be conveyed out as one uniform flow, greatly reducing segregation. The augers can be controlled independent of the conveyors to decrease the pile at the end of each pull.


augers_conveyors
Delta Plate and Close Proximity of Augers to Conveyors
The Delta Plate defines the front wall of the material tunnel, preventing mix from rolling forward under paver, a main cause of centerline segregation. It also removes mix from the conveyors providing better conveyor efficiency.


visibility
Visibility
The seats and controls mounted to the seat station slide out past the side of the machine for increased visibilty.  The entire assembly also pivots so the operator can position themselves as to see not only down the side of the machine but also back to the screed and down to the material tunnel.

↓ Specs

Untitled document Untitled document Untitled document Untitled document Untitled document
DIMENSIONS
Overall length / ft-in (m) 20' 1" (6.12 m)
Overall width / ft-in (m) 10' 6" (3.2 m)
Overall height / ft-in (m) 11' 10" (3.61 m)
Hopper / cu. ft. (cu. m) 210 cu. ft. (5.9 cu. m)
Track width / ft-in (m) 18" (457 mm)
Track length / ft-in (m) 10' 4-1/2" (3.16 m)
   
OPERATING WEIGHTS
Front Mounted *HES - lbs (kg) EZ III - 43,910 (19,917) EZ IV - 44,910 (20,370)
Rear Mounted *HES - lbs (kg) Eagle 10 - 45,770 (20,761)
Fixed width screed - lbs (kg) S-10 - 43,000 (19,505)
   
ENGINE
Engine MFG Caterpillar
Model C-7
Engine Tier Tier III
Performance - SAE HP / RPM 225 / 1,800
Number of Cylinders 6
Cooling Type Water
Fuel Tank Capacity 118 gal (447 ltr)
   
DRIVE
Final Drive 2 spd.
Number of Drive Pumps 2
Number of Drive Motors 2
Paving speed to 164 fpm (50 mpm)
Travel speed to 7.5 mph (12 kph)
   
SPECIFICATIONS
Steering Dual Travel Levers
Track type Rubber
Drive type Friction Drive
Number of Bogies 1 triple and 2 double - oscillate
Drive Wheel Material Rubber Covered
Front Idler Material Rubber Covered
Augers 16" (406 mm) Cast Ni-hard