RX-500 Half Lane Milling Machine

RX-500-ProductShot

↓ Overview

Untitled document The RX-500 is a 630 horsepower cold planer available with 4-track assemblies or optional 3-track assemblies. This lighter weight versatile machine allows contractor to cut up to 13” (330 m) deep with width of 6'3" (1.9 m), 6'7" (2 m), or 7'2" (2.184 m). The RX-500 is light and maneuverable for urban situations. A two-stage front loadout conveyor, with 60° swing to either side, provides ample loading capacity.

↓ Features

Untitled document Untitled document
Frame
Frame

All Roadtec Milling Machines start with an extremely strong frame completely fabricated, welded and assembled by us.  This gives us complete control over the design and quality of the build.  We are the only manufacturer to use A656 Grade 80 steel throughout the frame.  This special grade of steel has twice the strength of the mild steel that is commonly used.  This allows us to build and stronger lighter frame than anybody else in the industry. 
Four_track
Three Track or Four Track - It's Your Choice
Both three track and four track configurations have benefits, so why be forced into one or the other?  Roadtec lets you choose which you like better. 
Bolton_Track_Pads
Bolt-On Track Pads Standard
Roadtec offers bolt-on track pads standard because it saves the customer money.  Now when your track pads wear out you can simply unbolt the old ones and bolt-on new ones, saving you precious time.  No more changing grousers and wasting them.
Spray_Bars
Dual Water Spray Bars
Roadtec milling machines have two independent spray bars to inject water in the cutter housing.  The front spray bar is primarily for dust suppression, the rear spray bar cools the drum.
Conveyor_Swing
Secondary Conveyor Swing
All Roadtec milling machines offer 60 degree conveyor swing, allowing you to easily feed a truck in an adjacent lane or around a tight bend such as in a cul-de-sac.  
Folding_conveyor
Folding Conveyor

A folding secondary conveyor is available on all Roadtec Milling Machine models to aid in transport and loading.

 

↓ Specs

Untitled document Untitled document Untitled document Untitled document
  RX-500 3-Track RX-500 4-Track
ENGINE  
Engine MFG Cummins Cummins
Model QSX -15 QSX -15
Horsepower @ 2100 rpm 630 630
TRACKS
Number of Tracks 3 4
Track Width (Front, Back) 12", 14" 12", 12"
Track Length 68" front, 76" back 68"
Steering Control 4 Mode Joystick
Travel Speed 3.2 mph
High Working Speed 127 fpm 150 fpm
Low Working Speed 100 fpm 100 fpm
Turning Radius 5'8" 6'8"
MILLING DRUM
Standard Cutting Width 6'7"
Max Cutting Width 7'2"
Max Cutting Depth 13"
Drum Diameter w/ Teeth 44"
WEIGHT AND DIMENSIONS
Shipping Weight 54,260 lbs. 56,640 lbs.
Operating Length 47'4"
Shipping Height 9'5"
Shipping Width 7'9"
Operating Weight 60,780 lbs. 63,160 lbs.
CONVEYOR SYSTEM
Second. Conveyor Length 26'2"
Primary Conveyor Width 32"
Second. Conveyor Width 32"
Discharge Height 15'4"
Conveyor Swing (L/R) 60º/60º
SERVICE TANKS
Fuel tank 290 gal
Water tank 600 gal
Hydraulic tank 84 gal