Contractors looking for high productivity in a half-lane planer will find it in the RX-700. Featuring a 700 hp (522 kW) Caterpillar engine, this cold planer is available with either fourtrack or three-track assemblies. Built with the Roadtec focus on balanced weight distribution, the RX-700 is a heavy duty machine which is also user-friendly in both operation and maintenance. The RX-700 cuts up to 14” (35.6 cm) deep. Standard widths are 6'7" (201cm), 7'2" (218 cm), 8'2" (249cm), and 10' (305cm). Like all Roadtec planers this model features 60° front load-out conveyor swing. The optional VCS^TM Variable Cutter System for cutting widths of 24”, 36” and 48” (60cm, 91cm, and 121cm) is also offered for this model.

	Frame All Roadtec Milling Machines start with an extremely strong frame completely fabricated, welded and assembled by us.  This gives us complete control over the design and quality of the build.  We are the only manufacturer to use A656 Grade 80 steel throughout the frame.  This special grade of steel has twice the strength of the mild steel that is commonly used.  This allows us to build and stronger lighter frame than anybody else in the industry.
	Three Track or Four Track - It's Your Choice Both three track and four track configurations have benefits, so why be forced into one or the other?  Roadtec lets you choose which you like better.
	Bolt-On Track Pads Standard Roadtec offers bolt-on track pads standard because it saves the customer money.  Now when your track pads wear out you can simply unbolt the old ones and bolt-on new ones, saving you precious time.  No more changing grousers and wasting them.
	Dual Water Spray Bars Roadtec milling machines have two independent spray bars to inject water in the cutter housing.  The front spray bar is primarily for dust suppression, the rear spray bar cools the drum.
	Secondary Conveyor Swing All Roadtec milling machines offer 60 degree conveyor swing, allowing you to easily feed a truck in an adjacent lane or around a tight bend such as in a cul-de-sac.
	Folding Conveyor A folding secondary conveyor is available on all Roadtec Milling Machine models to aid in transport and loading.

 

	RX-700 3-Track	RX-700 4-Track
ENGINE
Engine MFG	Caterpillar
Model	C18
Horsepower @ 2100 rpm	700
TRACKS
Number of Tracks	3	4
Track Width (Front, Back)	14", 16"	14", 14"
Steering Control	4 Mode Joystick
Travel Speed	3.2 mph
High Working Speed	138 fpm	165 fpm
Low Working Speed	92 fpm	92 fpm
Turning Radius	6'10"	7'9"
MILLING DRUM
Standard Cutting Width	6'7"
Max Cutting Width	7'2"
Max Cutting Depth	14"
Drum Diameter w/ Teeth	46"
WEIGHT AND DIMENSIONS
Ship Weight w/ stnd drum	65,000 lbs.	69,800 lbs.
Shipping Weight w/ 7'2"	69,260 lbs.	74,060 lbs.
Operating Length	52'9"
Shipping Height	9'11"
Shipping Width	8'2"
Oper Weight w/ stnd drum	76,600 lbs.	80,800 lbs.
Operating Weight w/ 7'2"	80,860 lbs.	85,060 lbs.
CONVEYOR SYSTEM
Primary Conveyor Width	36"
Second. Conveyor Width	36"
Discharge Height	14'7"
Conveyor Swing (L/R)	60º/60º
SERVICE TANKS
Fuel tank	340 gal
Water tank	1100 gal
Hydraulic tank	100 gal